Eventide H8000FW Spezifikationen PDF herunterladen (Seite 72)

page!). Strictly speaking, assigning silence (-----------) to the last two inputs isn’t really

necessary since we don’t plan to use those outputs …

Now, we need to assign analog input 1 to DSP

A’s inputs 1&2. Do this at the DSP A menu page

in the SETUP area. Again, assigning silence to

the remaining inputs isn’t necessary because

Backward Garden only has two "live" inputs (its "I/O identifier" is 22).

Cool. Let’s assign the analog outputs now at the

outputs menu page in the SETUP area. We want

DSP A outputs 1&2 at analog out 1&2 to send to

the stereo cabinet. Although we’re not actually

using analog outputs 3&4, we still need to assign DSP B outputs 1&2 to them so that the

ADAT outputs can “tap” these signals.

Now let’s assign the AES/EBU outputs at the

outputs menu page. The first four AES/EBU

outputs are DSP B outputs 3-6. Recall that the

S/P DIF outputs simply "tap" AES/EBU

outputs 1/2, in this example, dsp B out 3 and dsp B out 4.

Finally, let’s assign the appropriate signals to the

ADAT outputs. Do this at the "bottom"

outputs menu page in the SETUP area. Notice

that ADAT inputs are also connected to the

ADAT channels that we weren’t interested in using (3 through 6). We probably didn’t

need to … H8000FW owners can set up AES11-18 and the FIREWIRE outputs in the

same way.

And that’s it! Once you get the hang of it, making custom routing configurations is no

sweat! When you are happy with things, don’t forget to save the routing (see next section).

Storing and Loading Routing Configurations

Nevertheless, you don’t have to wrestle with all those parameters every time you want to

change the routing configuration. As you’ll recall, in the

Overview and Quickstart

section we used the Routing Storage area for loading entire routing configurations in one

go. In addition to loading the preset routing configurations that came with the

H8000FW, you can also save your own configurations for future use.

 Block diagrams and descriptions of the preset routing configurations can be found in Loading Routing

Configurations on page 25.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 206 207

Keine Kommentare

Eventide H8000FW Spezifikationen Seite 72